Quick Answer: What Is The Difference Between Ddr3/1600 And 1866?

What is the difference between 1600 and 1866 Ram?

The 1866 RAM is about 16.5% faster than the 1600 RAM – so the choice is a no-brainer.

But wait, at CL10 vs CL9 the 1866 RAM is 12% slower than the 1600 RAM.

This means that you are paying quite a bit more for a a measly 4.5% performance gain..

Can I use 1866 Ram 1600?

Yes, a motherboard that supports RAM frequency of 1866 MHz will support memory modules with a frequency of 1600 MHz or lower.

What is the difference between ddr3 1333 and 1600?

The 1333 and 1600 designations refer to the transfer rates – theoretically, given same CAS latency, DDR3-1600 would perform better than DDR3-1333 due to its greater maximum bandwidth.

What does cl10 mean RAM?

2 points · 6 years ago. CL = CAS Latency. Basically it’s the delay between when the RAM is told to do something, and when it actually happens. (super watered down version). All you need to be worried about is that the lower the CL, the better.

Can I use 2 different Ram brands?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. … Different brands of Ram are fine to use together.

Is cl9 better than cl11?

Thus, the CL9 ram was 1% faster memory performance, and 2.6% faster stream performance. I should point out that the CL9 was consistently faster than CL11 on all five passes. There you have it.

Can I mix cl9 and cl11 RAM?

Generally yes but it will only run as fast as the slowest ram. …

What does ddr3 1866 mean?

It means its DDR3 1866 MHZ RAM. Its just a designation used by the DDR standard to easily categorize between DDR, DDR2 and DDR3 RAM and there different operating speeds. DDR means Double Data Rate. So DDR is 2x 1866 = 3732 . DDR2 is then 2×3732=7464 and taht times 2 is then just over 14900.

Can you mix 1600 and 1333 Ram?

Yes, you can mix 1333 and 1600 MHz RAM sticks, however the system will downclock all RAM to the speed of the slowest stick. For best performance, try and buy RAM that is the same speed or faster.

Which is faster 1333MHz or 1600MHz?

2 Answers. The 1600Mhz CL10 RAM has a higher clock speed (800MHz versus 666MHz) and a lower latency (12.5 ns versus 13.5 ns), so it’s the hands down winner. So, even though CL10 is a higher divisor than CL9, the increase from 1333MHz to 1600MHz in the numerator is more than enough to compensate for that.

Can I use 2400mhz ram 1600mHz motherboard?

They will work fine, all ram boots at SPD JEDEC standard, and the SPD of that ram will be 1600mhz, it may even be 1333mhz, I cant remember with DDR3 and you’ll need to manually bump it upto 1600mhz.

Which is faster cl9 or cl11?

There’s only a small difference. Having timings that high (CL11) negates most of the speed advantage. You’re not likely to notice the difference, and that unnoticeable difference isn’t worth the price. RAM speed comparison – We’re looking at a less than 2% difference from the fastest to the slowest.